Barn Board Wood Beams

Made from virgin wood, these barn beams match the color, texture and character of real barn wood as closely as possible. Their ultra-realistic look is captured from a proprietary wood treatment process that recreates the look of vintage reclaimed beams over 100 years old.

The ceiling beams are consistent in size, so covering existing structural elements is easier – the measurements will always be the same from one beam to the next. The other benefit of these beams is that they are offered in consistently long lengths, which is hard to come by with real reclaimed timber that is highly in demand.

Offered in many colors, these beams are lightweight and easy to install. They are everything barn wood is, and more.

Joints and seams in real wood beams:

• Lengths of 10 feet and longer will ship in multiple sections and require joints. Beam sections are meant to be joined on-site, during the installation process. The length of each section will be determined by Barron Designs. 
• Widths or heights larger than 7 inches may have a seam. This seam could be evident when looking at the finished product.
• Each wood beam is custom made to order.
• Please contact customer service if you have specific requirements or questions about joints and seams on our wood beams.  Our friendly, US-based customer service team is here to help make your vision come to life. 

Product Notes:

• For exterior installation we recommend adding a high quality clear coat exterior polyurethane with a UV inhibitor to protect the stain from fading.
• Colors vary dramatically from monitor to monitor. For this reason we HIGHLY RECOMMEND reviewing a sample prior to ordering. The cost of up to five (5) samples is rebated with a full sized product purchase.
• Dimensions specified are outside dimensions of the product. Material is approximately 1 inch thick.
• Products are hand fabricated. Allow at least ½ inch tolerance when covering existing materials.
• Products have screws embedded in them. We recommend cutting with a hand saw to avoid injury. Barron Designs is not responsible for bodily harm or equipment damage if power tools are used.
• LTL shipping costs for beams typically start at about $300 per shipment. Shipping and tax estimates can be easily obtained under order details in the cart section of the website.