SKU: BAEBM
Timber Faux Wood Beams
Timber Faux Wood Beams
-
Custom Timber Beams offer the best of both worlds - a wide variety of size options plus the highly popular Timber style. Now, no matter what your design or room dimensions, there’s a beam that will work for you.
Incredibly versatile, the beams will enhance a living room, kitchen, bedroom – or even a restaurant or retail store. Easy to install with just two people, you’ll have them up in no time.
Even better, the beams are made of high density polyurethane, which means they’re extremely durable and you're free to add them to any room or exterior setting without worry.
Custom Timber is a great way to add a rustic look to a home or commercial space at a fraction of both the time and cost.
Click here to check out our installation instructions.
Product Notes:
- Colors vary dramatically from monitor to monitor. For this reason we HIGHLY RECOMMEND reviewing a sample prior to ordering. The cost of up to five (5) samples will be deducted from a full-sized product purchase.
- Dimensions specified are outside dimensions of the product. Material is approximately 1 inch thick (+/- ¼ inch).
- Products are hand fabricated. Allow at least ½ inch tolerance when covering existing materials.
- Products have screws embedded in them that can easily be located with a stud finder. We recommend cutting with a hand saw to avoid injury. Barron Designs is not responsible for bodily harm or equipment damage if power tools are used.
- LTL shipping costs for beams typically start at about $300 per shipment. Shipping and tax estimates can be easily obtained under order details in the cart section of the website.
- Beams that are 22 feet or longer will be manufactured as a single beam then cut in half for shipping.
-
Construction Box Beam Corners Mitered Sides 3 or 4 (4 sided beams ship as two pieces: a three-sided beam plus a fitted panel to be attached during installation.) Inner Dimensions 3 sided: Approx. 2” less than outer width and 1” less than outer height. 4 sided: Approx. 2” less than outer dimensions. Inner dimensions may vary. Please allow tolerance when covering other materials. Endcaps Available Endcap Choices Standard and Chamfered available on any size, Scrolled and Cove available for beam heights between 6” and 24” Material High Density Polyurethane Fire-Rated Polyurethane Available Also available in this texture Custom Trusses, Arched beams, Mantels, L headers/2 sided beams, Planks Texture Heavily Distressed Manufactured In and Ships From North Carolina Outer Dimension Variance Outer dimensions can vary +/- ¼”. Products are hand fabricated, please allow a tolerance. Product Weight 3-sided 4"x4"x10' beam is 12lbs. Actual weight, based on customizations, will be visible when the product is added to cart. Use Interior/Exterior Touch-Up Kit Included Yes - for factory-finished products. Shipping Beams that are 22 feet or longer will be manufactured as a single beam then cut in half for shipping
UNSURE WHERE TO START?Shop Our Samples To Find The Perfect Finish For Your Project
Shop NowCustomer Reviews
Newest to Oldest
- Highest to Lowest
- Newest to Oldest
- Favorite Reviews
All Ratings
- All Ratings
- 5 ★ Reviews
- 4 ★ Reviews
- 3 ★ Reviews
- 2 ★ Reviews
- 1 ★ Reviews
Write a Review
Timber Faux Wood Beams How would you rate this product?
Christina B. Verified Customer 
04-01-25
Melinda B. Verified Customer 08-07-24
I purchased samples and found a perfect match to my new cabinets and floors in the "caramel" color. When the beams arrived, they did not match the caramel sample and were much closer to the "latte" sample. I let Barron know, but they just said "maybe the sample was old" and confirmed they were painted in the caramel color. I didn't have much choice at that point other than to have them installed. They look lovely and realistic, but the color is just wrong. I'm now going to have to hire someone to glaze or paint three 18 foot and two 13 foot beams. So disappointing.
Popular Questions
Our beams can be cut very easily with any hand saw with a finish blade. Here is the link to our beam installation instructions: https://www.barrondesigns.com/project...
We recommend adding 2-2 1/2 inches to the size of the dims listed on our product to allow for variations in the beam or the item which you are covering. Our product walls are 1'' thick with a variance of +/- 1/4''. So for the width each side is 1'' with the possible variance which is why we recommend the above. If you have further questions about fit, please contact our customer service team @ 800-651-4223 M-F 9am-5pm EST.
We will need your email to send out fire rating sheet. To ensure coverage of your beam with allowing tolerances, the size you listed should work. You may want to increase the width to 11 and the height to 15 just to be sure. If you will email info@barrondesigns.com and request the fire data sheet we will send it to you.
